Syncplicity Support

Follow

Information worksheet

As you implement the Syncplicity On-Premise Storage Connector, you need to have already set up and configured certain software and created host names and IP addresses before you start. In addition, you also need to write down network- and configuration-related information. You can use the Information Worksheet to collect all of this information in one place.

Hardware Requirements

Syncplicity On-Premise Storage Connector server 1:

IP address or host name _________________________________________

How much RAM _________________________________________________

How many cores __________________________________________

Size of HDD _____________________________________________________

Syncplicity On-Premise Storage Connector server 2:

IP address or host name _________________________________________

How much RAM _________________________________________________

How many cores __________________________________________

Size of HDD _____________________________________________________

Configuration Requirements

Network Configuration - Storage Connector 1:

Static IP address or hostname of Syncplicity Storage Connector ____________________________

Netmask of Syncplicity Storage Connector ____________________________

Gateway IP address or hostname _____________________________________

Broadcast IP address or hostname ____________________________________

 

Network Configuration - Storage Connector 2:

Static IP address or hostname of Syncplicity Storage Connector ____________________________

Netmask of Syncplicity Storage Connector ______________________________

Gateway IP address or hostname _____________________________________

Broadcast IP address or hostname ____________________________________

 

SSL-Offloading Load Balancer Information:

Name of Certification Authority (CA): __________________________________

Certificate number: _________________________________________________

Expiration date: ____________________________________________________

Port to which the Syncplicity clients connect: ______________________________
(recommended port number is HTTPS 443)

Destination port on each Syncplicty Storage Connector: 9000

 

Isilon Information:

Isilon cluster name or IP address: ______________________________________

Name of Syncplicity data directory: ___________________________________

Isilon cluster name used in NFS mount entry: /etc/fstab
(Must be a SmartConnect Network with a dynamically configured IP address)

Name of mounted folder:  mnt syncdata nfs rw

Standard NFS V3 Storage Information:

NFS server hostname or IP address: ___________________________________

Name of Syncplicity data directory: __________________________________

Name of mounted folder:  mnt syncdata nfs rw

Syncplicity Configuration Information:

Location and name of Syncplicity configuration file: /etc/syncp-storage/syncp-storage.conf

Syncplicity access key: ______________________________________________

Storage type: (atmos  for Atmos, isilon  for Isilon, vnx  for VNX, s3 for AWS, or fs  for generic NFS v3)

_______________________________

 

Atmos-Specific Configuration Information:

URL for listening mode: __________________________________________

Atmos authentication token: ____________________________________

Atmos secret key: _______________________________________________

 

Isilon-Specific Configuration Information:

Name of mount folder:  /mnt/ syncdata

 

VNX-Specific Configuration Information:

Mount point:  /mnt/ syncdata

Rootdir: /mnt/syncp/<folder_name> _______________________________________

 

AWS-Specific Configuration Information:

S3 bucket name: ____________________________________

S3 access key: ____________________________________

S3 secret key: _______________________________________________

 

Generic NFS v3-Specific Configuration Information:

Name of mount folder:  /mnt/syncdata

Powered by Zendesk